verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X450SFTC

The AirTAC SE50 Standard Cylinder SE50X450SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 450mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke450 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$137.48 $144.98Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X450SFTC

The AirTAC SE50X450SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push at 0.5 MPa across a 450 mm stroke. Its extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The integrated -S magnet enables precise end-position detection using AirTAC CMSE reed or DMSE electronic sensors.

Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration, softening hard impacts when cycling loads at speed. Fitted with a PT1/4 port and an M16x1.5 rod thread, this 50 mm bore unit provides a robust 30 mm cushion length to absorb kinetic energy efficiently.

Airtac SE50 Standard Cylinder SE50X450SFTC Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X450SFTC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke450 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X450SFTC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×450Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X450SFTC Is Used

conveyor_belt

Carton Diverting Gate

Actuates a routing flap on a packaging conveyor, using the 450 mm stroke and 982 N push to redirect heavy corrugated boxes between sorting lanes.

package_2

Pallet Film Carriage

Raises and lowers the stretch film roll carriage on a pallet wrapper, relying on the -S magnet and DMSE sensors for precise height positioning.

factory

Textile Beam Lifter

Elevates heavy textile warp beams into loom cradles, utilizing the FTC trunnion mount to accommodate pivoting articulation during the lift cycle.

Is the Airtac SE50 Standard Cylinder SE50X450SFTC the Right Cylinder?

Selecting this 50 mm bore yields a 982 N push at 0.5 MPa (1374 N at 0.7 MPa). If your application requires less force, the neighboring 40 mm bore provides a 628 N push, whereas stepping up to the 63 mm bore offers 1559 N. This model includes the FTC center-trunnion mounting accessory and a built-in magnet for CMSE/DMSE sensors. Because the stroke is 450 mm, the extended rod is susceptible to bending under lateral loads; an external guide mechanism is recommended to prevent rod-bearing wear.

As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, streamlining retrofits. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the mechanism must hold a vertical load without live air pressure, integrate a BSE rod lock or an external pilot-operated check valve.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X450SFTC FAQ

This 50 mm bore cylinder provides a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE50X450SFTC is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders of the same bore and stroke, utilizing standard mounting hardware. The -S magnet also ensures compatibility with AirTAC CMSE and DMSE position sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X450SFTC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X450SFTC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.