verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X450SH

The AirTAC SE50 Standard Cylinder SE50X450SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 450mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke450 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$127.24 $134.74Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X450SH

The AirTAC SE50X450SH is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 982 N at 0.5 MPa and a maximum thrust of 200 kgf. Its 50 mm bore and 450 mm stroke provide substantial extension reach for mid-range automation tasks. The square extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies bracket installation.

Because this configuration includes the -H seal option, it utilizes FKM (Viton) elastomers that widen the operating temperature range from -20 to +150 C, making it highly suitable for hot environments. The built-in -S magnet enables seamless integration with AirTAC CMSE reed or DMSE electronic position sensors along the three integrated sensor grooves. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening impacts when cycling at speeds up to 800 mm/s.

Airtac SE50 Standard Cylinder SE50X450SH Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X450SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke450 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X450SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×450Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X450SH Is Used

conveyor_belt

Bottle Diverters

Actuates routing arms on high-speed beverage bottling lines, utilizing the 450 mm stroke to shift products between parallel conveyors while withstanding washdown heat.

package_2

Flap Folding

Drives carton side-flap folding mechanisms in continuous packaging machines, where the 982 N push force securely tucks heavy cardboard during case sealing.

straighten

Press Ejection

Ejects formed aluminum parts from small hydraulic presses, relying on the FKM high-temperature seals to survive radiant heat radiating from the adjacent heated platens.

Is the Airtac SE50 Standard Cylinder SE50X450SH the Right Cylinder?

Selecting this 50 mm bore makes sense when an application requires the 982 N push at 0.5 MPa that this model provides. If your load is lighter, stepping down to the 40 mm bore drops the output to 628 N but saves space; conversely, upgrading to the 63 mm bore raises the push to 1559 N for heavier demands. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 cylinders, utilizing the same PT1/4 port, M16x1.5 rod thread, and standard mounting accessories.

With a 450 mm stroke, the unsupported piston rod is subject to bending forces under side loads, so an external guide rail is strongly recommended to prevent premature rod-bearing wear. Note that while the adjustable air cushions decelerate the piston near the stroke ends, they do not function as a locking device; if the air supply is lost, the cylinder will drift, and holding a suspended load requires a pilot-operated check valve or a BSE rod-lock variant.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X450SH FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The absolute maximum push thrust is 200 kgf when operated at the 1.0 MPa pressure limit.

Yes, the SE50X450SH is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint, port sizes (PT1/4), and rod thread (M16x1.5) as other standard ISO 15552 profile cylinders, allowing for a direct retrofit.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X450SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X450SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.