
The AirTAC SE50 Standard Cylinder SE50X482S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 482mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X482S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 982 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for seamless retrofitting.
This specific 482 mm configuration is a made-to-order stroke that maximizes the 50 mm bore's travel range. It comes factory-equipped with a built-in magnet (-S) for non-contact position sensing via AirTAC CMSE reed or DMSE electronic switches, and features field-adjustable pneumatic cushioning at both ends to smoothly decelerate the payload.
| Model | Airtac SE50 Standard Cylinder SE50X482S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 482 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×482 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates routing gates on a 482 mm travel path to shift glass beverage containers between packaging lanes, utilizing the 982 N push force to overcome guide friction.
Extends 482 mm to fold large cardboard flaps on automated carton erecting machines, relying on the adjustable end-cushions to prevent hard impacts that damage board creases.
Positions sheet metal stops with precision using the integrated -S magnet and DMSE electronic sensors, ensuring accurate bending coordinates across a wide working envelope.
Choosing this 50 mm bore provides 982 N of push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N; conversely, scaling up to the 63 mm bore provides 1559 N for heavier loads. Because this model has a 482 mm stroke, the unsupported piston rod is highly susceptible to bending under lateral stress—always pair it with an external linear guide to prevent side-load damage to the rod bearing. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold the load if air pressure drops. For position-holding safety, consider the BSE rod-lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The 50 mm bore provides a push force of 982 N at 0.5 MPa (1374 N at 0.7 MPa), a pull force of 825 N at 0.5 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port and a 20 mm diameter rod with an M16x1.5 thread.
Yes. The SE50X482S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares identical mounting footprint and pin hole dimensions with other ISO 15552 profile cylinders, allowing a direct retrofit without machining.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.