verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X500

The AirTAC SE50 Standard Cylinder SE50X500 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke500 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$119.07 $126.57Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X500

The AirTAC SE50X500 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a push force of 982 N at 0.5 MPa and a maximum of 200 kgf at 1.0 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush and resists corrosion while housing a 500 mm stroke. This design simplifies machine integration without sacrificing structural rigidity.

Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. This specific SKU is configured without a piston magnet, meaning it is not set up for CMSE or DMSE electronic position sensing out of the box. The 20 mm hard-chrome rod and M16x1.5 thread provide a robust interface for standard tooling.

Airtac SE50 Standard Cylinder SE50X500 Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X500
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke500 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X500

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X500 Is Used

conveyor_belt

Pallet Diverting Gate

Actuates a routing flap on a packaging conveyor, utilizing the 500 mm stroke to fully extend and redirect heavy pallets with 982 N of push force at 0.5 MPa.

packaging

Case Flap Folding

Drives the mechanical arms that fold major corrugated box flaps prior to hot-melt sealing, relying on the adjustable end cushions to prevent crushing the cardboard at high cycle speeds.

straighten

Press Ejector Station

Pushes stamped metal blanks out of a forming die, using the 200 kgf maximum thrust to clear parts that bind slightly in the tooling before the next cycle begins.

Is the Airtac SE50 Standard Cylinder SE50X500 the Right Cylinder?

Choosing this 50 mm bore makes sense when an application requires the 982 N push at 0.5 MPa that it provides. If your load is lighter, stepping down to the 40 mm bore yields 628 N of push force, whereas heavier loads require stepping up to the 63 mm bore for 1559 N. Because this model lacks a piston magnet, it cannot host CMSE or DMSE switches; if position feedback is needed, specify an SE50X500S variant instead.

With a 500 mm stroke, the unsupported rod length during extension increases susceptibility to side-load bending and rod-bearing wear. For optimal longevity, mount an external guide rail to absorb lateral forces and prevent binding. Furthermore, a plain SE cylinder cannot hold a load in place if air pressure drops or the valve centers—the piston will drift. For suspended or gravity-loaded applications requiring fail-safe holding, integrate an external pilot-operated check valve or select the BSE rod-lock variant. This unit uses a PT1/4 port and standard ISO 15552 mounting accessories.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X500 FAQ

The SE50X500 provides a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, and the maximum rated push is 200 kgf at 1.0 MPa. It operates on filtered air between 0.15 and 1.0 MPa, with a speed range of 30-800 mm/s.

Yes. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. You can reuse existing mounting hardware like FA or LB brackets. Note that this specific SKU lacks a piston magnet, so it will not work with CMSE or DMSE position sensors without modifying the configuration.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X500

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X500 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.