
The AirTAC SE50 Standard Cylinder SE50X500S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X500S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a push force of 982 N and a pull force of 825 N at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact body that mounts flush against machine frames while resisting corrosion. The integrated -S magnet allows seamless position detection using AirTAC CMSE reed or DMSE electronic sensors.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when moving loads at speeds up to 800 mm/s. Because this is a standard 500 mm stroke within a 50 mm bore, it provides extensive linear travel without requiring a made-to-order wait.
| Model | Airtac SE50 Standard Cylinder SE50X500S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 982 N push force and 500 mm travel needed to pivot heavy sorting diverters on high-speed parcel conveyor lines.
Extends 500 mm to shift large shrink-wrap film rolls into position on automated packaging machinery, using the -S magnet for precise end-position confirmation.
Positions sheet metal backstops on a press brake, leveraging the adjustable cushioning to stop the 500 mm stroke smoothly without shocking the gauge frame.
This 50 mm bore generates 982 N push at 0.5 MPa. If your application requires less force, the 40 mm neighbor provides 628 N; if you need to step up, the 63 mm bore offers 1559 N. The cylinder uses a PT1/4 port and a 20 mm rod with an M16x1.5 thread. To replace an existing unit, match the 50 mm bore, 500 mm stroke, and mounting accessory (such as LB foot or FA flange), and ensure you specify the -S magnet for sensor compatibility.
At 500 mm of stroke, the unsupported piston rod is subject to bending under heavy lateral loads. To prevent premature rod-bearing wear, incorporate an external guide rail to carry the weight rather than letting the cylinder rod absorb the side load. Note that the adjustable air cushion only decelerates the piston near the end caps; it does not hold the load if air pressure is lost.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X500S delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, and the maximum push capacity is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50X500S is dimensionally interchangeable per ISO 15552. You can drop it in as a replacement for other ISO 15552 profile cylinders by matching the 50 mm bore, 500 mm stroke, PT1/4 port, and your specific mounting hardware. The built-in magnet also supports AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.