
The AirTAC SE50 Standard Cylinder SE50X500SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X500SN is a double-acting single-rod ISO 15552 profile cylinder with a 50 mm bore and 500 mm stroke. It delivers a robust 982 N push at 0.5 MPa, making it well-suited for medium-force industrial tasks. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machine envelopes.
This unit includes a built-in magnet for CMSE and DMSE position sensing, plus an NBR seal for standard operating temperatures. The field-adjustable air cushion at both ends lets technicians dial in end-of-stroke deceleration via a setscrew, softening hard impacts without relying on fixed rubber bumpers.
| Model | Airtac SE50 Standard Cylinder SE50X500SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Providing 982 N of push at 0.5 MPa, this 500 mm stroke unit easily indexes pallets along a conveyor belt, utilizing its adjustable cushioning to soften stops at high cycle rates.
The 50 mm bore generates precise actuation over 500 mm to fold large corrugated carton flaps, while the built-in DMSE sensor confirms full extension for sequential gluing.
Leveraging the smooth extruded profile and NBR seals, this cylinder drives a 500 mm stroke to rotate heavy laboratory sample carousels, relying on field-adjustable air cushions to protect delicate glassware.
Stepping down to the 40 mm bore drops the 0.5 MPa push to 628 N, while moving up to the 63 mm bore increases it to 1559 N, allowing you to scale force precisely. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct retrofit for other standard profile cylinders using identical mounting hardware, PT1/4 ports, and M16x1.5 rod threads. Because the 500 mm stroke creates a long unsupported rod length, adding an external guide is strongly recommended to prevent bearing bending under side loads. Note that this cylinder cannot hold a load if air pressure is lost; use a BSE rod lock for fail-safe positioning.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. The 500 mm stroke falls within the standard 1200 mm maximum for this bore size.
Yes, the SE50X500SN features a standardized ISO 15552 mounting interface, making it dimensionally interchangeable with other profile cylinders. It uses a PT1/4 port and includes an -S magnet compatible with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.