verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X50SFTC

The AirTAC SE50 Standard Cylinder SE50X50SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke50 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$90.48 $97.98Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X50SFTC

The AirTAC SE50X50SFTC is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a solid 982 N push force at 0.5 MPa. It features a 50 mm bore, a 50 mm stroke, and an integrated FTC center trunnion mounting accessory for complex pivot actuation. The included magnetic piston (-S) enables seamless positioning feedback when paired with AirTAC CMSE reed or DMSE electronic sensors.

Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The field-adjustable pneumatic cushioning at both ends lets technicians fine-tune end-of-stroke deceleration via a set screw, absorbing kinetic energy smoothly rather than relying on a fixed rubber bumper.

Airtac SE50 Standard Cylinder SE50X50SFTC Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X50SFTC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke50 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X50SFTC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X50SFTC Is Used

packaging

Carton Flap Folding

Drives the mechanical arms that tuck and seal corrugated box flaps, utilizing the 50 mm stroke and 982 N thrust to positively fold heavy cardboard without bouncing back.

conveyor_belt

Belt Diverter Gate

Pivots a sorting deflector plate via the FTC trunnion mount to reroute packages on a high-speed logistics line, relying on the -S magnet for precise DMSE sensor confirmation.

precision_manufacturing

CNC Fixture Clamping

Locks aluminum castings into a machining center fixture, where the adjustable end cushions soften the impact on the workpiece during rapid 50 mm clamping cycles.

Is the Airtac SE50 Standard Cylinder SE50X50SFTC the Right Cylinder?

This 50 mm bore generates 982 N of push at 0.5 MPa (1374 N at 0.7 MPa). If your payload is lighter, stepping down to the 40 mm bore drops the output to 628 N, saving valuable space and air consumption. For heavier loads, the 63 mm bore increases thrust to 1559 N. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve centers; applications requiring true load holding without live pressure should integrate an external pilot-operated check valve or evaluate the BSE rod-lock variant.

The FTC trunnion mount provides a pivot point at the cylinder centerline, ideal for accommodating lateral linkage movement. Dimensionally interchangeable with other ISO 15552 cylinders, it serves as a direct replacement for retrofits. It uses a PT1/4 port and a Ø20 mm hard-chrome plated rod with an M16x1.5 thread.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X50SFTC FAQ

At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The absolute maximum push force is 200 kgf when operated at the 1.0 MPa pressure limit.

Yes. The SE50X50SFTC is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint, PT1/4 port size, and M16x1.5 rod thread of other 50 mm profile cylinders, allowing a direct replacement without modifying existing machine geometry.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X50SFTC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X50SFTC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.