
The AirTAC SE50 Standard Cylinder SE50X50SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 50mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X50SH is a double-acting single-rod ISO 15552 profile cylinder engineered for high-temperature environments. It generates 982 N of push force and 825 N of pull force at 0.5 MPa, making it well-suited for mid-range actuation tasks. The extruded aluminum barrel lacks external tie rods, yielding a compact footprint that resists corrosion and mounts flush against machine frames.
Equipped with a Viton (FKM) seal, this unit reliably operates in ambient temperatures up to 150 C where standard elastomers would fail. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to tune end-stop deceleration for the specific load and speed of the application.
| Model | Airtac SE50 Standard Cylinder SE50X50SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles the 982 N push stroke required to pull and position high-temperature polymer films in packaging machinery, leveraging the 150 C Viton seal.
Actuates routing gates near industrial drying ovens where ambient heat would degrade standard TPU seals, ensuring reliable 50 mm routing movements.
Provides the 825 N pull force to retract an ejection pin from a heated hot-stamping press, using its FKM seals to withstand radiated heat.
When sizing this actuator, consider stepping down to the 40 mm bore if your load requires only 628 N of push at 0.5 MPa, or moving up to the 63 mm bore for 1559 N of push. As a standard ISO 15552 profile cylinder, it serves as a direct replacement for any cylinder sharing that mounting interface, utilizing the PT1/4 port and M16x1.5 rod thread. Because this is a double-acting cylinder, it relies on live air pressure to maintain position; if your process cannot tolerate drift upon air loss, explore the BSE rod-lock variant. At a 50 mm stroke, side-loading on the M16x1.5 rod is minimal, though external guides are recommended for any rigidly attached loads.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X50SH delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes, the square extruded profile is dimensionally interchangeable per ISO 15552, allowing it to drop into existing mounts without frame modifications. The built-in magnet (-S) is specifically configured for AirTAC CMSE reed and DMSE electronic position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.