
The AirTAC SE50 Standard Cylinder SE50X512S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 512mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X512S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. It delivers a robust 982 N push force at 0.5 MPa, scaling up to 1374 N at 0.7 MPa. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush in tight machinery spaces while protecting against workshop debris.
This 50 mm bore unit features a built-in magnet for direct integration with CMSE reed and DMSE electronic position sensors. The 512 mm stroke is a non-standard made-to-order length, maximizing extended reach. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s cycles.
| Model | Airtac SE50 Standard Cylinder SE50X512S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 512 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×512 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanism on automated carton erectors, utilizing the 512 mm stroke to clear wide packaging formats and 982 N thrust to snap heavy cardboard flaps into place.
Actuates routing arms on conveyor lines, pushing filled pallets onto parallel tracks where the 30 mm adjustable cushion absorbs the kinetic energy of the 50 mm bore at high transit speeds.
Moves analytical carriages across long testing beds, relying on the -S magnet and DMSE solid-state sensors to confirm exact sample positioning without physical contact.
When sizing this unit, consider stepping down to the 40 mm bore if your load requires less force, which provides 628 N push at 0.5 MPa. If your application demands heavier thrust, the 63 mm bore offers 1559 N push at 0.5 MPa. Because this is a double-acting cylinder, it will not hold a load if air pressure drops or the valve is centered; for position holding, explore the BSE rod lock variant. The 512 mm stroke exceeds the 50 mm standard maximum of 1200 mm, making it a custom order. At this extended stroke, the 20 mm rod is subjected to greater bending moments under side loads, so utilizing an external guide is recommended to prevent premature rod-bearing wear. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement sharing standard mounting hardware and PT1/4 ports.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X512S delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It operates at speeds ranging from 30-800 mm/s.
Yes, the SE50X512S is dimensionally interchangeable per ISO 15552 standards. It shares the standardized mounting interface and PT1/4 port, allowing it to direct replace other ISO 15552 profile cylinders while utilizing existing hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.