
The AirTAC SE50 Standard Cylinder SE50X520 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 520mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X520 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized mounting interfaces on multiple sides.
This 520 mm stroke unit features field-adjustable air cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers. Because this specific SKU lacks the -S magnet suffix, it is not equipped from the factory for CMSE or DMSE position sensing.
| Model | Airtac SE50 Standard Cylinder SE50X520 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 520 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×520 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding mechanisms on continuous-motion packaging lines, utilizing the 982 N push force and 520 mm stroke to open and erect large corrugated cartons reliably.
Executes 520 mm linear strokes to push heavy pallets onto secondary transfer lanes, benefiting from the compact tie-rod-free profile to fit within tight conveyor framework.
Moves sample racks between diagnostic stations in automated laboratory equipment, where the adjustable end cushions soften the 520 mm travel to protect delicate glassware.
If your application requires less thrust, stepping down to the 40 mm bore yields a 628 N push at 0.5 MPa, whereas moving up to the 63 mm bore provides 1559 N of extending force. Keep in mind that a standard SE cylinder will drift if air pressure is lost; for position holding without live pressure, consider the BSE rod lock variant.
With a 520 mm stroke, the 20 mm rod and its M16x1.5 thread face increased bending moments under lateral loads. Implementing an external guide rail is strongly recommended to prevent premature rod-bearing wear and ensure smooth linear travel.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X520 generates 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf at 1.0 MPa, operating within a 0.15-1.0 MPa pressure range.
Yes, the SE50X520 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and body interface as other ISO 15552 profile cylinders. You can use it as a direct replacement alongside standardized mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.