
The AirTAC SE50 Standard Cylinder SE50X520S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 520mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X520S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous linear motion tasks. Operating at 0.5 MPa, it provides a robust 982 N push force and 825 N pull force, making it highly suitable for mid-range actuation. The 520 mm stroke is a standard offering for this bore size, ensuring predictable lead times.
A standout feature of this unit is its extruded aluminum barrel, which eliminates external tie rods entirely. This clean profile design not only resists corrosion but also allows for flush mounting on machinery frames. Equipped with a built-in magnet (the -S option), it seamlessly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection without adding bulky external hardware.
| Model | Airtac SE50 Standard Cylinder SE50X520S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 520 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×520 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the carton forming mechanism in continuous packaging lines, utilizing the 520 mm stroke to fully extend and square heavy corrugated blanks before sealing.
Actuates a routing gate on a conveyor network, using the 982 N push force to smoothly pivot loaded pallets onto secondary transfer tracks without hesitation.
Positions multi-well testing trays under automated pipetting heads, relying on the built-in magnet and DMSE electronic sensors to confirm exact 520 mm travel endpoints.
When sizing this actuator, consider stepping up to the 63 mm bore if your load requires greater thrust, as the larger bore provides 1559 N of push at 0.5 MPa. Conversely, if you need to save space and your load permits, the 40 mm bore yields 628 N of push. Because this is a 520 mm stroke, the 20 mm rod experiences higher bending moments under heavy lateral loads; always use an external guide to prevent rod-bearing distortion.
As a true ISO 15552 cylinder, the SE50X520S is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to drop it directly into existing footprints without altering mounting hardware. It uses a PT1/4 port and standard mounting accessories. Remember that the field-adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If your application must maintain position without live air pressure, you will need an external pilot-operated check valve or a BSE rod lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
This 50 mm bore cylinder delivers 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N. The maximum allowable push force is 200 kgf at 1.0 MPa.
Yes, the SE50X520S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing machine designs using the same mounting interface and hardware, provided you maintain the PT1/4 port and 520 mm stroke dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.