
The AirTAC SE50 Standard Cylinder SE50X550 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 550mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X550 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a completely flush body that resists corrosion and simplifies mounting on cramped machinery.
This 50 mm bore unit features a 20 mm rod and field-adjustable pneumatic cushioning at both ends to soften hard end-stops over its 550 mm travel. Note that this specific SKU lacks the -S magnet, meaning it is not ready for CMSE or DMSE position sensing without modification.
| Model | Airtac SE50 Standard Cylinder SE50X550 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the folding arms on a packaging line carton erector, utilizing the 982 N push force to snap corrugated blanks squarely at high cycle rates.
Actuates a routing flap on a conveyor system, relying on the 550 mm stroke to fully open the lane for heavy pallet traffic.
Positions the material stop on a metal press brake, where the adjustable end cushions absorb kinetic energy to prevent gauge bounce during rapid retracts.
If you need to step down from this 982 N push capacity, the adjacent 40 mm bore provides 628 N at 0.5 MPa; conversely, stepping up to the 63 mm bore yields 1559 N. Because the 550 mm stroke creates a long unsupported rod span, you must use an external guide to prevent rod-bearing bending under side loads. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing the PT1/4 port, 50 mm bore, and standard mounting accessories without brand-specific footprints.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X550 generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port.
No, the SE50X550 is a standard double-acting cylinder and the adjustable air cushions only decelerate the piston near stroke end; they do not lock the rod. If you need fail-safe load holding, consider the BSE rod lock variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.