
The AirTAC SE50 Standard Cylinder SE50X550SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 550mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X550SN is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 50 mm bore and 550 mm stroke. It generates 982 N of push force at 0.5 MPa and operates efficiently at speeds between 30 and 800 mm/s. Equipped with a PT1/4 port and a 20 mm hard-chrome plated rod, it provides robust linear motion for demanding industrial environments.
This model incorporates an NBR seal compound suited for standard temperature ranges and includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position sensors. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant profile that mounts flush, while the field-adjustable pneumatic cushioning at both ends allows precise deceleration of heavy payloads at stroke endpoints.
| Model | Airtac SE50 Standard Cylinder SE50X550SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 550 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×550 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Providing 982 N of push at 0.5 MPa across a 550 mm span, this cylinder actuates diverting gates on high-speed beverage bottling conveyors, using its adjustable cushioning to softly stop the arm without jarring the glass containers.
The 825 N retract force at 0.5 MPa is ideal for folding mechanisms on corrugated box formers, where the NBR seals withstand typical ambient factory temperatures and the built-in magnet triggers DMSE sensors for precise cycle counting.
Utilizing its 550 mm stroke, this unit ejects bent metal sheets from a CNC press brake, relying on the rigid square extruded barrel to resist deflection during the rapid 30-800 mm/s ejection stroke.
Generating 982 N of push at 0.5 MPa, this 50 mm bore cylinder fits mid-range force applications perfectly. If your project requires less force, the 40 mm neighbor provides 628 N of push, whereas stepping up to the 63 mm bore yields 1559 N for heavier loads. Because this is a 550 mm stroke, the extended 20 mm rod length increases the risk of rod-bearing bending under lateral stress; utilizing an external guide rail is strongly recommended to prevent premature wear.
This SE profile is dimensionally interchangeable per ISO 15552, meaning it functions as a direct replacement for other ISO 15552 cylinders using identical mounting hardware. To configure this specific unit, note the 50 mm bore, 550 mm stroke, PT1/4 port, NBR seals, and the -S sensor magnet. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your application must maintain position without live air pressure, consider the BSE rod-lock variant.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
The SE50X550SN generates 982 N of push force and 825 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range for this 50 mm bore cylinder is 30-800 mm/s.
Yes, the SE50X550SN is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders using the same mounting footprint. It features field-adjustable pneumatic cushioning at both ends via a screw, allowing you to tune the end-of-stroke deceleration to soften hard impacts, though it is not a locking mechanism.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.