Airtac SE50 Standard Cylinder SE50X570S
The AirTAC Airtac SE50 Standard Cylinder SE50X570S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 570mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke570 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
About the Airtac SE50 Standard Cylinder SE50X570S
The AirTAC SE50X570S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. Operating at 0.5 MPa, it generates 982 N of push force and 825 N of pull force, utilizing a 50 mm bore and a 570 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 footprint.
Equipped with a built-in magnet (-S), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushions at both ends allow technicians to tune the deceleration of the piston, softening hard end stops during high-speed operations up to 800 mm/s. This customizable damping prevents mechanical shock, extending the lifespan of both the cylinder and the payload.
Airtac SE50 Standard Cylinder SE50X570S Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50X570S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50X570S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50X570S Is Used
Pallet Diverters
Actuates routing arms on 24V conveyor lines, using the 570 mm stroke to shift pallets cleanly between parallel transport lanes.
Case Erectors
Deploys the main folding mandrel to square up corrugated cardboard blanks, leveraging the 982 N push force at 0.5 MPa to hold flaps securely.
Vertical Lift Gates
Raises and lowers mezzanine safety gates, relying on the built-in magnet and DMSE sensors to confirm barrier position for interlocked access control.
Is the Airtac SE50 Standard Cylinder SE50X570S the Right Cylinder?
Selecting the SE50X570S is ideal when your application requires a mid-range force output with an extended reach. If you need to scale down, the 40 mm bore variant provides 628 N of push at 0.5 MPa, whereas stepping up to the 63 mm bore yields 1559 N. Because this cylinder features a 570 mm stroke, the unsupported piston rod is susceptible to bending under heavy lateral loads; always pair it with an external guide rail to prevent rod-bearing damage. As a true ISO 15552 profile cylinder, it serves as a drop-in replacement for any standard 50 mm bore, 570 mm stroke, PT1/4 ported cylinder, sharing identical mounting interface dimensions. Note that the adjustable cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50X570S FAQ
At 0.5 MPa, the SE50X570S delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s, features a PT1/4 port, and has a 20 mm rod with an M16x1.5 thread.
No, the SE50X570S is a standard double-acting cylinder and will drift if air pressure is lost or the valve is centered. The adjustable air cushions at both ends only serve to decelerate the piston near the end of the stroke; they do not function as a locking mechanism. For load-holding requirements, consider a BSE series rod lock cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50X570S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.