
The AirTAC SE50 Standard Cylinder SE50X600SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X600SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding high-temperature environments. Equipped with a Viton (FKM) seal, it withstands operating temperatures up to 150 C while delivering a robust 982 N push force at 0.5 MPa. Its 600 mm stroke provides extensive linear travel for deep-reaching machinery.
The extruded aluminum barrel features a clean, no-tie-rod profile that prevents debris buildup and allows flush mounting on production lines. Field-adjustable air cushions at both ends let technicians fine-tune end-of-stroke deceleration to prevent hard impacts. The built-in magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic sensors for precise position verification.
| Model | Airtac SE50 Standard Cylinder SE50X600SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles the 600 mm extraction stroke to pull high-temperature thermoplastic film from heat tunnels, utilizing the Viton seal to resist ambient radiant heat up to 150 C.
Pushes heavy glassware out of a tempering oven with 982 N of force, relying on the FKM seal to maintain integrity near the furnace mouth.
Extends 600 mm to open large laboratory curing oven doors, where the adjustable cushions soften the 800 mm/s travel to protect delicate glass observation windows.
This 50 mm bore generates 982 N push at 0.5 MPa. If your application requires less force, the 40 mm bore offers 628 N; for heavier loads, step up to the 63 mm bore providing 1559 N. As a standard double-acting cylinder, the SE50X600SH will drift if air pressure is lost or the valve centers—use a BSE rod lock for fail-safe holding. With a 600 mm stroke, the 20 mm rod is highly susceptible to bending under side loads; always support the load with an external guide rail. To retrofit an existing ISO 15552 unit, match the 50 mm bore, 600 mm stroke, PT1/4 port, and mounting accessory.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE50X600SH delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa operating pressure.
Yes, the SE50X600SH is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and interface. You can drop it in as a replacement while keeping your existing mounting hardware, PT1/4 ports, and CMSE/DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.