
The AirTAC SE50 Standard Cylinder SE50X60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50X60S is a double-acting single-rod profile cylinder delivering 982 N of push force at 0.5 MPa. Built to the ISO 15552 standard, its extruded aluminum barrel omits external tie rods for a flush, compact footprint that simplifies mounting and resists corrosion.
Equipped with a built-in magnet (-S), this unit supports CMSE reed and DMSE electronic position sensors for precise mid-stroke detection. The field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, protecting your tooling during rapid 30-800 mm/s cycles.
| Model | Airtac SE50 Standard Cylinder SE50X60S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 982 N extend force and 60 mm stroke to rapidly fold corrugated cardboard flaps on high-speed packaging lines without crushing the material.
Actuates a routing gate to deflect plastic bottles on a conveyor, relying on the flush profile barrel and DMSE electronic sensor for compact, timed sorting.
Presses small bushings into aluminum housings, utilizing the adjustable end cushions to soften the impact at the 60 mm stroke termination.
This 50 mm bore strikes a balance between the 40 mm option (628 N push) and the 63 mm option (1559 N push) at 0.5 MPa, letting you scale output precisely. As an ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting dimensions and PT1/4 ports.
The integrated -S magnet enables direct fitting of CMSE or DMSE switches without external hardware. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not lock the rod. If your process must hold a load without live air pressure, consider a BSE rod-lock variant or an external pilot check valve.
AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The air supply port size is PT1/4.
Yes, it shares the exact ISO 15552 mounting interface and dimensions for seamless retrofitting. The included -S magnet works specifically with AirTAC CMSE reed and DMSE electronic sensors for direct position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.