Airtac SE50 Standard Cylinder SE50X60SFTC
The AirTAC Airtac SE50 Standard Cylinder SE50X60SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke60 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
About the Airtac SE50 Standard Cylinder SE50X60SFTC
The AirTAC SE50X60SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 982 N push force at 0.5 MPa. Driven by a 50 mm bore and 60 mm stroke, it operates efficiently between 0.15 and 1.0 MPa with a speed range of 30-800 mm/s. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This specific configuration includes a built-in position magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors along its three integrated sensor grooves. It utilizes an FTC center trunnion mounting accessory and features field-adjustable pneumatic cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw rather than relying on fixed rubber bumpers.
Airtac SE50 Standard Cylinder SE50X60SFTC Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50X60SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50X60SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50X60SFTC Is Used
Carton Flap Folding
Provides the precise 982 N push and 60 mm stroke needed to fold corrugated cardboard flaps on high-speed packaging lines prior to sealing.
Pallet Diverter Gate
Uses the FTC trunnion mount to pivot a routing gate smoothly, leveraging the 825 N pull force to redirect heavy pallets on a conveyor.
CNC Fixture Clamping
Secures aluminum castings inside a CNC machining center, relying on the built-in magnet and DMSE sensors to confirm clamp engagement.
Is the Airtac SE50 Standard Cylinder SE50X60SFTC the Right Cylinder?
Selecting this 50 mm bore makes sense when an application requires roughly 982 N of push at 0.5 MPa. If your load is lighter, stepping down to the 40 mm bore yields 628 N of push, whereas heavier payloads justify stepping up to the 63 mm bore for 1559 N. Because the SE50X60SFTC uses an FTC center trunnion mount, it is ideal for pivoting mechanisms, though the cylinder itself will drift if air pressure is lost or the valve is centered—it cannot hold a load without live pressure, so a BSE rod lock is required for secure clamping.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement for other ISO 15552 profile cylinders, utilizing the same mounting footprint and PT1/4 port size. The 60 mm stroke keeps the 20 mm rod highly resistant to bending, keeping side-load stress on the rod bearing minimal without needing an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50X60SFTC FAQ
At 0.5 MPa, the SE50X60SFTC delivers 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE50X60SFTC is dimensionally interchangeable per ISO 15552 standards. It shares the exact same mounting interface and PT1/4 port size as other ISO 15552 profile cylinders, allowing it to function as a direct drop-in replacement without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50X60SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.