Airtac SE50 Standard Cylinder SE50X60SH
The AirTAC Airtac SE50 Standard Cylinder SE50X60SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke60 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
About the Airtac SE50 Standard Cylinder SE50X60SH
The AirTAC SE50X60SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It generates 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal components.
Fitted from the factory with FKM (Viton) high-temperature seals, this unit reliably operates from -20 C up to 150 C, far exceeding standard NBR temperature limits. The integrated -S magnet enables seamless position detection with AirTAC CMSE reed and DMSE electronic switches. Furthermore, the field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, preventing harsh impacts during high-speed cycling.
Airtac SE50 Standard Cylinder SE50X60SH Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50X60SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50X60SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50X60SH Is Used
Injection Mold Extraction
Handles the 982 N push force needed to eject plastic parts from hot mold halves, where the 150 C FKM Viton seal survives ambient radiant heat without degrading.
Hot-End Diverters
Actuates sorting gates on 60 mm strokes within powder-coating ovens, using the integrated magnet to trigger DMSE electronic sensors for precise indexing.
Film Sealing Press
Drives heated sealing jaws on automated packaging lines, leveraging the adjustable end cushions to soften impact and prevent tearing during rapid 30-800 mm/s cycles.
Is the Airtac SE50 Standard Cylinder SE50X60SH the Right Cylinder?
Selecting this 50 mm bore yields 982 N push at 0.5 MPa. If your payload is lighter, the 40 mm neighbor provides 628 N of push, whereas stepping up to the 63 mm bore increases thrust to 1559 N. Because this is a double-acting cylinder, it relies on continuous air pressure to maintain its position; if air is lost or the valve centers, the piston will drift. For load-holding without live pressure, consider the BSE rod-lock variant.
This 60 mm stroke configuration is fully standard and dimensionally interchangeable with other ISO 15552 cylinders, making it a drop-in retrofit for existing fixtures. It features a PT1/4 port, an M16x1.5 rod thread, and a 20 mm rod diameter. The FKM Viton seal and built-in magnet make it ideal for high-heat applications requiring position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50X60SH FAQ
At 0.5 MPa, it provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and thanks to the FKM Viton seals, it handles temperatures from -20 C to 150 C.
Yes. The SE50X60SH is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. Its square extruded profile matches the standardized mounting footprint exactly, allowing you to drop it directly into existing FA front flange or LB foot mounting hardware without machining.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50X60SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.