Airtac SE50 Standard Cylinder SE50X760S
The AirTAC Airtac SE50 Standard Cylinder SE50X760S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 760mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke760 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
About the Airtac SE50 Standard Cylinder SE50X760S
The AirTAC SE50X760S is a double-acting single-rod ISO 15552 profile cylinder featuring a 50 mm bore and 760 mm stroke. It delivers a robust 982 N push force at 0.5 MPa and 1374 N at 0.7 MPa, making it well-suited for mid-range industrial actuation tasks.
This unit includes a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel eliminates external tie rods for a flush mounting profile, while the field-adjustable air cushions at both ends let you precisely tune end-of-stroke deceleration for fast-moving 760 mm loads.
Airtac SE50 Standard Cylinder SE50X760S Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50X760S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 760 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50X760S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×760 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50X760S Is Used
Bottling Line Diverter
Actuates routing gates on high-speed beverage conveyors, utilizing the 760 mm stroke to shift product lanes smoothly while sensors track full extension.
Corrugated Box Erector
Folds and seals large corrugated carton blanks, where the 982 N push force reliably overcomes cardboard spring-back resistance across the long travel.
Lab Sample Carousel Indexer
Drives a rotary sample carousel in analytical instruments, relying on adjustable end cushions to prevent liquid spillage during rapid 760 mm transits.
Is the Airtac SE50 Standard Cylinder SE50X760S the Right Cylinder?
For sizing flexibility, stepping down to a 40 mm bore yields 628 N push at 0.5 MPa, whereas stepping up to a 63 mm bore provides 1559 N. Because this is a standard 760 mm stroke, it utilizes the maximum catalog length for this bore. At 760 mm, the 20 mm rod and thread face leverage bending moments under side loads; an external guide carriage is strongly recommended to prevent rod-bearing wear. Note that this cylinder relies on live air pressure to move and hold position—if air is lost, the piston drifts, so use a BSE rod lock for fail-safe holding. As a true ISO 15552 cylinder, it serves as a drop-in dimensional replacement for any standard ISO 15552 cylinder of matching bore and stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50X760S FAQ
The SE50X760S generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It features a PT1/4 port and a 20 mm rod with an M16x1.5 thread.
Yes. The SE50X760S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and rod thread dimensions of other ISO 15552 profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50X760S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.