verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50X860S

The AirTAC SE50 Standard Cylinder SE50X860S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 860mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke860 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$177.95 $185.45Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE50 Standard Cylinder SE50X860S

The AirTAC SE50X860S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a non-standard 860 mm stroke. It delivers a robust 982 N push force at 0.5 MPa, utilizing a Ø20 mm rod and M16x1.5 thread. Because this unit exceeds the standard 1200 mm maximum for a 50 mm bore, it is supplied as a made-to-order component.

The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant profile that mounts flush into tight machinery spaces. Equipped with a built-in magnet (-S), this cylinder interfaces directly with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable air cushioning at both ends allows you to tune end-stop deceleration to match the high kinetic energy of this long stroke.

Airtac SE50 Standard Cylinder SE50X860S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50X860S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke860 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50X860S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×860Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50X860S Is Used

conveyor_belt

Long-Transfer Conveyor Diverters

Pushes packages across a 860 mm transfer span on a packaging line, utilizing the 982 N push force to overcome carton friction.

straighten

Wood Panel Push-Off Stations

Ejects medium-density fiberboard panels from a CNC router, relying on the 30 mm adjustable cushion to soften the long-stroke end stop.

science

Textile Dyeing Beam Extraction

Slowly extracts heavy dyeing beams from a wash tank, using the built-in -S magnet to trigger DMSE sensors for safe machine operation.

Is the Airtac SE50 Standard Cylinder SE50X860S the Right Cylinder?

This 50 mm bore generates 982 N push at 0.5 MPa. If your load requires less force, stepping down to the 40 mm bore yields 628 N push, while moving up to the 63 mm bore provides 1559 N push. Remember that a plain SE cylinder will drift and cannot hold a load if air pressure is lost; for position holding, consider the BSE rod lock variant. Because the 860 mm stroke is non-standard and exceeds the 1200 mm catalog maximum for this bore, expect a made-to-order lead time. The port is PT1/4, and the unit includes the -S magnet for CMSE/DMSE sensors. For a stroke of this length, the unsupported piston rod is highly susceptible to bending under side loads; always incorporate an external guide rail to prevent rod-bearing damage.

AirtacDistr lists every SE50 order code with its price on one page at https://airtacdistr.com/products/airtac-se50-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50X860S FAQ

At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.

Yes, the SE50X860S is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, sharing the same mounting hardware and footprint, without claiming brand equivalence.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50X860S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE50X860S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.