
The AirTAC SE63 Standard Cylinder SE63AX10 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 10mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63AX10 is a double-acting ISO 15552 profile cylinder engineered for short-stroke actuation in demanding environments. Built with a SUS420J2 stainless steel rod, it thrives in corrosive or washdown settings where standard carbon steel fails. It delivers a robust 1559 N push at 0.5 MPa, utilizing a 20 mm rod and M16x1.5 thread.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, protecting tooling during rapid 30-800 mm/s cycles. Note this SKU omits the position-sensing magnet, prioritizing pure mechanical thrust.
| Model | Airtac SE63 Standard Cylinder SE63AX10 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1559 N push force to knock small stamped metal pins from a die in a washdown-equipped stamping line, leveraging the SUS420J2 rod to resist cutting fluid corrosion.
Executes rapid 10 mm tucks to fold inner flaps on high-speed packaging machines, relying on the adjustable cushion to prevent harsh impacts at 800 mm/s.
Holds analytical lab samples securely under chemical exposure, where the stainless steel rod and tie-rod-free extruded profile prevent particle accumulation.
When sizing this actuator, compare its 1559 N push against your dynamic load. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa. Conversely, heavier loads necessitate the 80 mm bore, which provides 2513 N. Because this 10 mm stroke is extremely short, side-load stress on the rod bearing is minimal, though external guides remain best practice for rigid payloads. As a dimensionally interchangeable ISO 15552 cylinder, it drops directly into existing setups matching its 63 mm bore, PT3/8 port, and standard mounting accessories. Remember that the adjustable cushion only softens end stops; it cannot hold a load pneumatically if air pressure drops.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder features a 20 mm SUS420J2 stainless steel rod with an M16x1.5 thread. It generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and reaches a maximum push of 318 kgf at 1.0 MPa.
Yes, the SE63AX10 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounts for other ISO 15552 cylinders, matching the 63 mm bore and PT3/8 port. Note this specific SKU lacks a sensor magnet, so position detection is not possible without modifying the assembly.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.