
The AirTAC SE63 Standard Cylinder SE63X1000 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1000mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1000 is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal pneumatics.
This 63 mm bore unit features a 1000 mm stroke and PT3/8 ports. Because this specific SKU lacks the -S magnet code, it arrives without built-in position sensing; adding CMSE or DMSE switches requires a magnet-equipped variant. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening impacts during high-speed 30-800 mm/s cycles.
| Model | Airtac SE63 Standard Cylinder SE63X1000 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes heavy pallets between roller conveyor sections using its 1559 N thrust, while the 1000 mm stroke covers the full lane width.
Extends across a packaging machine to fold large corrugated carton flaps, relying on adjustable cushions to prevent harsh slamming at stroke end.
Indexing raw bar stock into a lathe spindle, where the tie-rod-free extruded profile keeps the feeder compact and resistant to cutting fluid.
When sizing this actuator, compare its 1559 N push @0.5 MPa against its neighbors: step down to the 50 mm bore for 982 N if the load is lighter, or step up to the 80 mm bore for 2513 N if you need higher thrust. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 cylinders, matching standardized mounting dimensions and PT3/8 port locations. To replicate this exact setup, specify a 63 mm bore, 1000 mm stroke, basic mounting, and no magnet.
Because the 1000 mm stroke is substantial, the Ø20 mm rod and internal bearing face increased bending moments under side loads. For long extensions, always incorporate an external guide rail to prevent rod deflection and premature seal wear. Note that a plain SE cylinder cannot hold a load if air pressure drops; use a BSE rod lock variant for secure positioning.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa.
Yes, the SE63X1000 shares the exact ISO 15552 mounting interface and dimensions, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders. Just match the 63 mm bore, 1000 mm stroke, and PT3/8 port size during installation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.