
The AirTAC SE63 Standard Cylinder SE63X1000SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1000mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1000SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It features a 63 mm bore and a 1000 mm stroke, delivering 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. Equipped with a Viton (FKM) seal, this variant withstands sustained operating temperatures up to 150 C, making it ideal for thermally aggressive processes.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machinery. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors, while the field-adjustable air cushioning at both ends allows technicians to fine-tune deceleration and soften hard end stops at high cycling speeds.
| Model | Airtac SE63 Standard Cylinder SE63X1000SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives plastic sheet handling and mold platens in high-heat thermoforming lines, where the 150 C FKM seal survives ambient radiated heat and the 1559 N push force securely clamps tooling.
Extends a 1000 mm reach to push hot baking trays between cooling racks, leveraging the built-in magnet for DMSE electronic timing and the adjustable cushion to stop gently without jarring delicate goods.
Opens and closes heavy equipment safety enclosures near hot robotic welders, using the no-tie-rod profile for flush mounting and the M16x1.5 rod thread to secure robust linkage arms.
Selecting this 63 mm bore cylinder provides 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N push, whereas stepping up to the 80 mm bore provides 2513 N push for heavier payloads. Because the 1000 mm stroke pushes the limits of the 63 mm frame, long unsupported strokes risk rod-bearing bending; you should incorporate an external guide to prevent excessive side load and premature seal wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, sharing standard mounting hardware. This SE63X1000SH configuration includes a PT3/8 port, a high-temperature FKM seal, and a built-in position-sensing magnet. Note that a plain SE cylinder does not hold its load when air is lost or the valve is centered; if your process demands failsafe position holding, consider the AirTAC BSE rod-lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa with a speed range of 30-800 mm/s.
Yes, the SE63X1000SH is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other standard ISO 15552 profile cylinders, sharing identical mounting dimensions and a PT3/8 port. The built-in magnet also works seamlessly with AirTAC CMSE and DMSE position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.