
The AirTAC SE63 Standard Cylinder SE63X100SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X100SH is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous industrial environments. It delivers a robust 1559 N push force at 0.5 MPa alongside a 1402 N pull, making it well-suited for mid-weight actuation tasks. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush and resists corrosion.
This specific configuration integrates a high-temperature Viton (FKM) seal, extending the operating range up to 150 C for thermally demanding processes. A built-in magnet (-S) enables seamless position detection using AirTAC CMSE reed or DMSE electronic sensors, while the field-adjustable air cushioning at both ends allows you to fine-tune end-of-stroke deceleration.
| Model | Airtac SE63 Standard Cylinder SE63X100SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to cleanly shear plastic runner gates on high-temperature injection molding lines, leveraging the FKM seal to withstand ambient radiant heat up to 150 C.
Actuates a sweeping arm to redirect heavy wooden pallets on a packaging conveyor, utilizing the 100 mm stroke and adjustable end cushions to soften impacts at high cycling speeds.
Compresses corrugated carton flaps during hot-melt adhesive application, where the integrated magnet triggers DMSE electronic sensors to verify clamp position before glue dispensing.
Selecting this 63 mm bore cylinder makes sense when your application requires approximately 1559 N of push force at 0.5 MPa. If your load demands less energy, stepping down to the 50 mm bore provides 982 N of push, whereas scaling up to the 80 mm bore yields 2513 N. The 100 mm stroke offers ample extension for standard machine movements, and the PT3/8 port ensures adequate flow to maintain the 30-800 mm/s speed range.
Because this is a double-acting cylinder, it relies on continuous air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift and cannot hold a load. For applications requiring true position holding without live pressure, consider the BSE rod-lock variant. Furthermore, the FKM seal is ideal for high-heat environments up to 150 C, and the integrated magnet allows direct mounting of CMSE or DMSE switches without external hardware.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X100SH generates 1559 N of push and 1402 N of pull at 0.5 MPa, 2182 N of push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. Equipped with a Viton (FKM) seal, it safely operates in environments reaching 150 C.
Yes, the SE63X100SH is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 profile cylinders using existing mounting hardware, and its built-in magnet works directly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.