
The AirTAC SE63 Standard Cylinder SE63X1070 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1070mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1070 is a double-acting single-rod ISO 15552 profile cylinder engineered for a non-standard 1070 mm stroke. It generates 1559 N of push force at 0.5 MPa and utilizes a 20 mm piston rod with an M16x1.5 thread. Because this stroke exceeds the standard 1500 mm maximum for a 63 mm bore, it is produced as a made-to-order unit for specialized long-reach machinery.
The extruded aluminum barrel design omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies sensor placement. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s. Note that this specific SKU lacks a built-in magnet, so it does not support position sensing without physical modification.
| Model | Airtac SE63 Standard Cylinder SE63X1070 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1070 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1070 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 1070 mm stroke to index heavy pallets between roller conveyor lanes, relying on the 1559 N push force to overcome rolling resistance without stalling.
Raises large fabric weaving beams into overhead loom cradles, where the 63 mm bore provides the necessary lifting power and the long stroke accommodates deep machine frames.
Actuates a wide-format sheet metal straightening guide, using the full 1070 mm extension to span wide conveyor belts while maintaining rigidity via the 20 mm rod.
This 63 mm bore provides 1559 N push at 0.5 MPa. If your application requires less force, the neighboring 50 mm bore offers 982 N of push; if you need substantially more power, stepping up to the 80 mm bore yields 2513 N. Because the 1070 mm stroke is non-standard, expect a made-to-order lead time. The PT3/8 ports and ISO 15552 mounting interface ensure it drops directly into existing footprints using standard LB, FA, or TC mounting accessories.
At 1070 mm, the unsupported rod length is significant. Even with a robust 20 mm rod, side loads will induce bending moments on the rod bearing. An external guide mechanism is mandatory to prevent premature seal wear and piston drift. Furthermore, the adjustable air cushion only decelerates the piston near the end caps; it cannot hold a load vertically if air pressure is lost. For suspended loads requiring safety, integrate an external BSE rod lock or pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with an absolute maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s.
Yes. The SE63X1070 adheres strictly to the ISO 15552 profile cylinder standard, meaning its mounting dimensions, PT3/8 port locations, and rod thread (M16x1.5) are fully interchangeable with other ISO 15552 cylinders. Note that this specific SKU lacks a sensor magnet and features a non-standard 1070 mm stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.