
The AirTAC SE63 Standard Cylinder SE63X1100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1100mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1100S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. Operating at 0.5 MPa, it provides a substantial 1559 N push force and 1402 N pull force, making it well-suited for heavy-duty industrial handling. The extruded aluminum barrel design omits external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for seamless retrofits.
This specific configuration includes a 1100 mm stroke, which is a made-to-order length exceeding the standard 1500 mm maximum for this bore, and features a built-in magnet (-S) for position sensing. By pairing the magnet with AirTAC CMSE reed or DMSE electronic switches, operators gain reliable end-of-travel feedback. Furthermore, the cylinder incorporates field-adjustable air cushioning at both ends, allowing technicians to tune the end-of-stroke deceleration via a screw to prevent hard impact damage during high-speed operations.
| Model | Airtac SE63 Standard Cylinder SE63X1100S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Utilizes the 1100 mm stroke to push heavy timber pallets off a main conveyor belt, relying on the 1559 N push force to overcome sliding friction.
Actuates a multi-section security gate in a climate-controlled warehouse, using the -S magnet and DMSE sensors to confirm full extension.
Squashes and aligns heavy gauge sheet metal bundles on a stacking pallet, benefiting from the adjustable cushions to soften the 1100 mm travel stops.
Choosing the SE63X1100S means requiring both significant reach and mid-tier force. If 1559 N of push at 0.5 MPa is excessive for your application, stepping down to the 50 mm bore yields 982 N of push, whereas upgrading to the 80 mm bore provides a robust 2513 N. Because this unit features a 1100 mm stroke, the 20 mm rod and M16x1.5 thread experience significant bending moments under side loads; an external guide rail is strongly recommended to prevent premature rod-bearing wear.
As a standard ISO 15552 profile cylinder, this model serves as a direct replacement for any cylinder sharing that mounting interface. To complete your setup, verify you have the PT3/8 port connections, appropriate mounting accessories (like FA or TC brackets), and CMSE or DMSE sensors to leverage the built-in magnet. Note that the air cushions only decelerate the piston near stroke end; they do not hold the load if air pressure is lost.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X1100S generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N. The maximum allowable push force is 318 kgf when operating at the maximum pressure of 1.0 MPa.
Yes, the SE63X1100S is manufactured to strict ISO 15552 / VDMA 24562 dimensional standards, making it fully interchangeable with other ISO 15552 profile cylinders. Its smooth, tie-rod-free extruded barrel simply requires matching ISO mounting hardware for a seamless retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.