verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X1150S

The AirTAC SE63 Standard Cylinder SE63X1150S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke1150 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$257.72 $265.22Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X1150S

The AirTAC SE63X1150S is a double-acting single-rod ISO 15552 profile cylinder featuring a 63 mm bore and a 1150 mm stroke. Because this stroke exceeds the standard 1500 mm maximum for this bore, it is supplied as a non-standard, made-to-order unit. It delivers a robust 1559 N push force at 0.5 MPa, making it well-suited for demanding linear actuation tasks.

This model includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. The extruded aluminum barrel eliminates external tie rods, providing a compact, corrosion-resistant body with sensor grooves on three sides. Field-adjustable air cushions at both ends allow you to fine-tune end-of-stroke deceleration to protect your machinery.

Airtac SE63 Standard Cylinder SE63X1150S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X1150S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke1150 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X1150S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×1150Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X1150S Is Used

conveyor_belt

Pallet Transfer Line Indexer

Uses the 1150 mm stroke to push heavy pallets between machining stations, relying on the 1559 N push force to overcome friction without stalling.

package_2

Large Carton Erector Arm

Deploys the long extension to fold and seal oversized corrugated boxes, using the adjustable air cushion to soften the rapid end-of-stroke impact.

science

Automated Lab Sample Shuttle

Moves sample racks across a wide diagnostic workstation, tracking position via the built-in magnet paired with DMSE electronic sensors.

Is the Airtac SE63 Standard Cylinder SE63X1150S the Right Cylinder?

This 63 mm bore cylinder provides 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N push, while moving up to the 80 mm bore provides 2513 N push for heavier loads. Keep in mind that a plain SE cylinder does not hold a load when air is lost or exhausted; the piston will drift. If your application requires static holding, consider the BSE rod lock variant.

At a 1150 mm stroke, the Ø20 mm rod and bearing are subject to significant bending moments under side loads. For this custom length, using an external guide rail is strongly recommended to prevent premature wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement sharing standard mounting hardware like TC centre trunnions or FA front flanges, and utilizes a PT3/8 port.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X1150S FAQ

This 63 mm bore cylinder delivers 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at 30-800 mm/s, uses a PT3/8 port, and features a Ø20 mm rod with an M16x1.5 thread.

Yes, the SE63X1150S is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting footprint and accessory interface as other ISO 15552 profile cylinders, allowing a direct retrofit without modifying your machine plates.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X1150S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X1150S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.