
The AirTAC SE63 Standard Cylinder SE63X1200 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1200 is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. Delivering a robust 1559 N push force at 0.5 MPa, this 63 mm bore unit utilizes a PT3/8 port and a 20 mm hard-chrome piston rod to reliably drive loads over its 1200 mm stroke. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a compact, corrosion-resistant profile that mounts flush against machine frames while protecting internal mechanics from shop-floor debris.
Because this specific SKU is supplied without a built-in magnet, it does not support direct CMSE or DMSE position sensing out of the box. To manage the high kinetic energy of a 1200 mm extension, the cylinder features field-adjustable pneumatic air cushions at both ends. Technicians can tune these cushion needles via a simple set screw to soften hard end-stops at operating speeds up to 800 mm/s, ensuring smooth deceleration rather than relying on a fixed rubber bumper.
| Model | Airtac SE63 Standard Cylinder SE63X1200 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the main pusher arm on a 1200 mm pallet transfer conveyor, utilizing the 1559 N push force to index heavy wood pallets between machining centers.
Actuates a long-reach folding mechanism on a corrugated box packaging line, where the adjustable end cushions absorb the kinetic energy of the 1200 mm stroke at high speed.
Extends a stock feeding carriage deep into a CNC lathe spindle, relying on the tie-rod-free extruded profile to prevent swarf accumulation and ensure smooth operation.
When sizing this model, compare its 1559 N push at 0.5 MPa against its immediate neighbors to ensure optimal performance. Stepping down to a 50 mm bore drops the output to 982 N, which may underpower heavy actuators, while stepping up to an 80 mm bore raises the push force to 2513 N for heavier payloads. At a 1200 mm stroke, the unsupported 20 mm rod is highly susceptible to bending under lateral stress; always incorporate an external linear guide to prevent premature rod-bearing wear. As a standard ISO 15552 component, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing identical mounting interface hardware. Note that a plain SE cylinder cannot hold a load if air pressure drops—the piston will drift—so integrate a BSE rod lock for fail-safe vertical positioning.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X1200 provides a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
No, the adjustable air cushions at both ends only decelerate the piston near the stroke limits and do not act as a locking mechanism. If air is exhausted or a valve is centered, the piston will drift. For position holding, consider the AirTAC BSE rod lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.