
The AirTAC SE63 Standard Cylinder SE63X120S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 120mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X120S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. Delivering a robust 1559 N push force at 0.5 MPa, it utilizes a 63 mm bore and 120 mm stroke to power mid-to-heavy industrial motion. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Equipped with a built-in magnet (S option), this unit seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable air cushions at both ends allow technicians to tune end-cap deceleration, preventing harsh mechanical impacts during high-speed operations.
| Model | Airtac SE63 Standard Cylinder SE63X120S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to reliably fold and seal heavy corrugated carton blanks at cycle rates up to 800 mm/s.
Actuates heavy-duty routing gates on packaging lines, using the 120 mm stroke and DMSE electronic sensors for repeatable mid-lane positioning.
Pushes finished molded parts out of light injection tooling, leveraging the adjustable end cushions to protect delicate plastic components from impact.
Delivering 1559 N of push force at 0.5 MPa, this 63 mm bore is ideally sized for medium-duty handling. If your application requires less force and a smaller footprint, the 50 mm bore provides 982 N of push at 0.5 MPa. For heavier loads requiring more thrust, stepping up to the 80 mm bore yields 2513 N of push at 0.5 MPa. Because this is a standard double-acting cylinder, it will not hold a load if air pressure drops; for position-holding safety, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for any standard ISO 15552 cylinder, utilizing the existing PT3/8 port and standard mounting accessories.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X120S generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum rated push force is 318 kgf at 1.0 MPa operating pressure.
Yes, the SE63X120S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware using the standard M16x1.5 rod thread and PT3/8 port, while retaining the built-in magnet for CMSE or DMSE sensor compatibility.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.