
The AirTAC SE63 Standard Cylinder SE63X125SG is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 125mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X125SG is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Designed with a 63 mm bore and 125 mm stroke, it operates efficiently between 30-800 mm/s using a G3/8 BSPP port. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting environmental contamination.
This unit includes a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-travel deceleration via a set screw, effectively softening hard impacts during high-speed operations. This profile design guarantees dimensional interchangeability with other ISO 15552 cylinders, facilitating straightforward retrofits.
| Model | Airtac SE63 Standard Cylinder SE63X125SG |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push at 0.5 MPa required to reliably fold and seal heavy corrugated carton flaps on continuous packaging lines.
Shifts heavy wooden pallets laterally at transfer stations, utilizing the 125 mm stroke to actuate routing gates smoothly.
Secures mid-sized aluminum castings inside machining cells, using the adjustable end cushions to prevent jarring the fixture at fast traverse speeds.
Generating 1559 N of thrust at 0.5 MPa, this 63 mm bore fits neatly between the 50 mm (982 N) and 80 mm (2513 N) options, letting you step down for energy savings or up for heavier payloads. The -S magnet supports CMSE and DMSE sensors for precise end-of-stroke detection. Because the 125 mm stroke is below the 300 mm threshold, side-load stress on the M16x1.5 threaded rod bearing is minimal, though an external guide remains best practice for heavy lateral loads. Remember, the adjustable air cushions only decelerate the piston near stroke end; they do not lock the load. If your process requires position holding during air loss, consider the BSE rod-lock variant or an external pilot-operated check valve.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 1559 N and the pull force is 1402 N. At 0.7 MPa, the push force reaches 2182 N. The absolute maximum push capacity is 318 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, the square extruded profile matches ISO 15552 mounting dimensions for direct interchangeability. The built-in -S magnet is specifically designed to trigger AirTAC CMSE reed switches and DMSE electronic sensors along the three sensor grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.