verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X125SH

The AirTAC SE63 Standard Cylinder SE63X125SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 125mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke125 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$106.51 $114.01Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X125SH

The AirTAC SE63X125SH is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa and a 1402 N pull. Equipped with a Viton (FKM) seal, it withstands continuous operating temperatures up to 150 C, making it ideal for hot environments where standard elastomers fail. The 125 mm stroke moves smoothly at 30-800 mm/s via a PT3/8 port.

This unit includes a built-in magnet (-S) for direct positioning feedback using AirTAC CMSE reed or DMSE electronic sensors. Its extruded aluminum barrel omits external tie rods, offering a clean, corrosion-resistant profile that mounts flush in tight spaces. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration to eliminate hard impacts.

Airtac SE63 Standard Cylinder SE63X125SH Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X125SH
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke125 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X125SH

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×125Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X125SH Is Used

factory

Injection Mold Ejection

Uses the 1559 N extend force and 150 C Viton seal to eject hot plastic parts from mold cavities without degrading the seals.

conveyor_belt

Hot End Diverting

Actuates a diverting gate on a conveyor transporting heated metal stampings, leveraging the 125 mm stroke and heat-resistant FKM elastomer.

package_2

Heat-Seal Press

Drives a 63 mm bore sealing jaw against heated film webs, using the adjustable cushion to soften the stroke end and prevent jaw chipping.

Is the Airtac SE63 Standard Cylinder SE63X125SH the Right Cylinder?

This 63 mm bore provides 1559 N push at 0.5 MPa. If your application requires less force, step down to the 50 mm bore offering 982 N push; if you need more power, step up to the 80 mm bore delivering 2513 N push. For this 125 mm stroke, the Ø20 mm rod handles side loading well, but always verify guide loads. Remember that this cylinder is double-acting and relies on live air pressure to move; it does not hold position pneumatically if air is lost. If your machine needs static holding without air, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for any standard ISO 15552 cylinder using identical mounting hardware.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X125SH FAQ

This 63 mm bore cylinder provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at 30-800 mm/s with a PT3/8 port, and the Viton seal extends the temperature range from -20 C to 150 C.

Yes. The SE63X125SH is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and rod thread (M16x1.5) as other ISO 15552 profile cylinders, allowing a direct replacement without modifying your existing machine brackets.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X125SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X125SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.