
The AirTAC SE63 Standard Cylinder SE63X125SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 125mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X125SN is a double-acting single-rod profile cylinder built to ISO 15552 standards, delivering a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 footprint for seamless retrofits.
Equipped with an NBR seal and a built-in position-sensing magnet, this 63 mm bore unit operates seamlessly with AirTAC CMSE reed and DMSE electronic sensors. The field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X125SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the exact 1559 N push force required to secure heavy cast iron engine blocks during precision CNC machining operations.
Utilizes its 125 mm stroke and CMSE magnet feedback to rapidly open and fold corrugated packaging blanks at high cycling speeds.
Leverages the robust 20 mm rod and adjustable end cushions to smoothly redirect heavy wooden pallets along sorting lines.
Selecting this 63 mm bore cylinder makes sense when your application requires the 1559 N push at 0.5 MPa that it provides. If your load is lighter, stepping down to the 50 mm bore yields 982 N of push force, whereas stepping up to the 80 mm bore provides 2513 N for heavier demands. This specific configuration includes the -S magnet for position detection and an NBR seal for standard operating temperatures.
Keep in mind that a standard double-acting cylinder drifts when air pressure is lost or the valve centers, so it cannot hold a vertical load safely without live pressure; utilize a BSE rod lock variant if static holding is mandatory. Because this model carries a 125 mm stroke, side loading is minimal, but always ensure the rod-end thread M16x1.5 is aligned correctly to prevent premature bearing wear.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE63X125SN shares the exact ISO 15552 / VDMA 24562 mounting interface, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders. The PT3/8 port and M16x1.5 rod thread ensure straightforward mechanical and pneumatic integration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.