
The AirTAC SE63 Standard Cylinder SE63X135S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 135mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X135S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force and 1402 N of pull force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush within confined machinery frames.
Equipped with a built-in magnet (-S), this unit seamlessly hosts AirTAC CMSE reed and DMSE electronic position sensors along the three integrated sensor grooves. Field-adjustable pneumatic cushioning at both stroke ends allows technicians to tune end-of-stroke deceleration, softening hard mechanical stops during high-speed 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X135S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to reliably fold heavy corrugated carton flaps during continuous packaging line operation.
Utilizes the 135 mm stroke to actuate a heavy-duty stopper arm on a roller conveyor, securely halting 63 mm bore-class pallet loads.
Drives the automatic safety door of a CNC lathe, using its adjustable cushions to prevent harsh impacts at 800 mm/s operating speeds.
Stepping down to the 50 mm bore reduces the 0.5 MPa push output to 982 N, whereas moving up to the 80 mm bore increases it to 2513 N. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure drops; applications requiring mid-stroke positioning under zero pressure should adopt the BSE rod-lock variant instead. The PT3/8 port and M16x1.5 rod thread match standard ISO 15552 mounting hardware for direct retrofitting.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X135S generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, and the maximum push force is 318 kgf at 1.0 MPa.
Yes, as an ISO 15552 profile cylinder, it shares standard mounting dimensions and PT3/8 ports for direct replacement alongside other ISO 15552 cylinders. The integrated -S magnet also supports AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.