verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X1400S

The AirTAC SE63 Standard Cylinder SE63X1400S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1400mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke1400 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$292.62 $300.12Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X1400S

The AirTAC SE63X1400S is a double-acting, single-rod ISO 15552 profile cylinder engineered for long-reach linear motion. It delivers a theoretical push force of 1559 N at 0.5 MPa and a maximum push capacity of 318 kgf at 1.0 MPa. Equipped with a built-in magnet, the body is designed to seamlessly accept AirTAC CMSE reed and DMSE electronic position sensors along its three integrated grooves.

Built with an extruded aluminum square barrel, this unit omits external tie rods to provide a smooth, compact exterior that resists corrosion and mounts flush against machine frames. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads across its extended 1400 mm travel.

Airtac SE63 Standard Cylinder SE63X1400S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X1400S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke1400 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X1400S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×1400Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X1400S Is Used

conveyor_belt

Pallet Transfer Pusher

Uses the 1400 mm stroke to push heavy pallets sideways between adjacent roller conveyors, relying on the 1559 N push force to overcome sliding friction.

straighten

Sheet Metal Staging

Actuates a long-armed sweeper to align large steel sheets at the infeed of a press line, benefiting from the tie-rod-free profile that prevents debris buildup.

warehouse

Automated Storage Retrieval

Drives a telescopic extractor arm in a vertical lift module, utilizing the built-in magnet and DMSE sensors to confirm full extension at 1400 mm.

Is the Airtac SE63 Standard Cylinder SE63X1400S the Right Cylinder?

This 63 mm bore provides a robust 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push force; conversely, scaling up to the 80 mm bore provides 2513 N. Because this model features a 1400 mm stroke, the unsupported piston rod is highly susceptible to bending under side loads—always incorporate an external linear guide to prevent premature rod-bearing wear.

As a non-standard stroke made-to-order configuration, the SE63X1400S features a PT3/8 port and a Ø20 mm rod with an M16x1.5 thread. It is dimensionally interchangeable per ISO 15552, allowing it to drop directly into existing foot, flange, or trunnion mounting hardware. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost, so a BSE rod lock is required for secure positioning.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X1400S FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with an absolute maximum push of 318 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.

Yes, it is dimensionally interchangeable per ISO 15552, meaning it shares standard mounting and rod-end dimensions with other profile cylinders. However, the adjustable air cushion only decelerates the piston near stroke end; it does not function as a brake, so the cylinder will drift if air pressure is lost.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X1400S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X1400S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.