
The AirTAC SE63 Standard Cylinder SE63X1500S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1500mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1500S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. It delivers a robust 1559 N push force at 0.5 MPa and features a 1500 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while maintaining the standardized ISO 15552 footprint for direct retrofitting.
Equipped with a built-in S magnet, this unit supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable air cushions at both ends allow technicians to tune deceleration and soften hard mechanical stops at high cycling speeds. Note that this cushion only decelerates the piston near the stroke end; it does not lock or hold the load if air pressure is lost.
| Model | Airtac SE63 Standard Cylinder SE63X1500S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives heavy pallets along a 1500 mm stroke in automated assembly lines, utilizing the 1559 N push force to overcome cart inertia.
Extends to feed bulk packaging film into wrapping machinery, using the built-in S magnet to trigger DMSE electronic sensors for precise material indexing.
Ejects long metal sheets from a press brake, benefiting from the adjustable end cushions to decelerate the 63 mm bore piston smoothly at high speeds.
This 63 mm bore generates 1559 N push at 0.5 MPa. If your application requires less force, the adjacent 50 mm bore provides 982 N push; if you need higher thrust, stepping up to the 80 mm bore yields 2513 N push. Because this model uses a 1500 mm stroke, the unsupported rod length introduces a risk of bending under heavy side loads—always pair this cylinder with an external guide rail to prevent rod-bearing damage. For jobs requiring position holding without live air pressure, transition to the BSE rod-lock variant instead of relying on the cushion. To match this exact configuration for a retrofit, specify: 63 mm bore, 1500 mm stroke, PT3/8 port, basic mounting, and the S magnet option.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X1500S provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
No, the SE63X1500S is a standard double-acting cylinder and its adjustable air cushion only decelerates the piston near stroke end; it does not act as a brake or lock. If you need to hold a load without live air pressure, use the BSE rod-lock variant or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.