
The AirTAC SE63 Standard Cylinder SE63X150N is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X150N is a double-acting single-rod ISO 15552 profile cylinder engineered for industrial pneumatics. Operating at 0.5 MPa, it generates 1559 N of push force and 1402 N of pull force, utilizing a 63 mm bore and 150 mm stroke. This SKU specifies an NBR seal, making it highly resilient for standard shop air environments rather than the high-temperature duties requiring FKM.
The extruded aluminum barrel lacks external tie rods, yielding a smooth, compact body that resists corrosion and allows flush mounting on machinery. Because this specific configuration omits the -S magnet, it is not ready for CMSE or DMSE position sensing out of the box. Field-adjustable pneumatic cushioning at both stroke ends allows you to fine-tune end-of-stroke deceleration, protecting payloads from hard mechanical impacts.
| Model | Airtac SE63 Standard Cylinder SE63X150N |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
With 1559 N of push at 0.5 MPa, this 63 mm cylinder provides the lateral force needed to deflect heavy wooden pallets on high-speed packaging conveyor lines.
The 150 mm stroke securely clamps cast aluminum housings during CNC machining, utilizing the NBR seal for longevity in standard factory air systems.
Folds and seals corrugated cardboard cartons on automated packaging equipment, where the smooth tie-rod-free profile prevents snagging on passing materials.
When sizing this 63 mm bore unit, compare its 1559 N push at 0.5 MPa against its neighbors. Stepping down to a 50 mm bore reduces output to 982 N, while stepping up to an 80 mm bore increases thrust to 2513 N. This SE63X150N variant uses a PT3/8 port and standard NBR seals, making it a direct, dimensionally interchangeable direct replacement for any standard ISO 15552 cylinder footprint.
Note that this SKU lacks the -S magnet, so it cannot host CMSE or DMSE sensors without modification. Furthermore, the adjustable air cushion only decelerates the piston near the stroke ends; it does not lock or hold the load if air pressure is lost. For position-holding safety, consider the BSE rod-lock variant.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N. The maximum rated push force is 318 kgf at 1.0 MPa operating pressure.
No. The field-adjustable air cushion at both ends only decelerates the piston near the stroke limits; it is not a brake. If your application requires the load to be held when air is exhausted or pressure drops, you should use a BSE rod-lock cylinder or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.