
The AirTAC SE63 Standard Cylinder SE63X160H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X160H is a double-acting, single-rod ISO 15552 profile cylinder engineered for high-temperature pneumatics. It delivers a robust 1559 N push force at 0.5 MPa (2182 N at 0.7 MPa) across its 160 mm stroke, driven by a 20 mm hard-chrome rod. Equipped with a Viton (FKM) seal, this unit reliably operates in ambient temperatures up to 150 C, making it ideal for thermal processing environments where standard TPU seals would degrade.
The extruded aluminum barrel design eliminates external tie rods, yielding a compact, corrosion-resistant profile that mounts flush while exposing sensor grooves on three sides. Because this specific SKU lacks the -S magnet code, it does not support CMSE or DMSE position sensing without modification. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard mechanical stops during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X160H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles product transitions through 150 C heat shrink tunnels, utilizing the Viton FKM seal to prevent thermal degradation while applying 1559 N of push force at 0.5 MPa.
Cycles hot mold ejector plates where ambient temperatures spike near machinery, relying on the 36 mm adjustable cushion to soften 160 mm strokes at high speeds.
Indexes glass container transfer arms in hot-end IS machine sections, benefiting from the tie-rod-free extruded profile that resists heat expansion binding.
When sizing this 63 mm bore, compare its 1559 N push at 0.5 MPa against the next size down (50 mm bore yielding 982 N) or the next size up (80 mm bore yielding 2513 N) to match your exact load. Remember that a plain double-acting cylinder drifts when air is lost or the valve centers; this model cannot hold a load without live pressure, so if your application requires fail-safe position holding, consider the AirTAC BSE rod-lock variant. For direct retrofits, this cylinder is dimensionally interchangeable per ISO 15552, utilizing a PT3/8 port, M16x1.5 rod thread, and standard mounting hardware. At 160 mm stroke, side-load stress on the rod bearing is minimal, but always verify guide alignment.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X160H generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and reaches a maximum push of 318 kgf at 1.0 MPa operating pressure.
Yes, the SE63X160H is dimensionally interchangeable per ISO 15552 standards, matching standard mounting centers and PT3/8 ports for direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.