
The AirTAC SE63 Standard Cylinder SE63X160S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X160S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Driven by a 63 mm bore and 160 mm stroke, it features a square extruded aluminum barrel that eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
Because this variant includes the -S magnet code, it is fully primed for AirTAC CMSE reed and DMSE electronic position sensing. The integrated design also incorporates field-adjustable air cushions at both stroke ends, allowing technicians to dial out harsh end-of-stroke impacts during high-speed 30-800 mm/s cycling.
| Model | Airtac SE63 Standard Cylinder SE63X160S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to reliably fold and seal heavy cardboard flaps on continuous-motion packaging lines.
Uses the 160 mm stroke to extend a routing flap at 30-800 mm/s, redirecting heavy wooden pallets between conveyor lanes.
Holds heavy cast iron blocks securely against a machining bed, leveraging the -S magnet for DMSE sensors to confirm clamp status.
When sizing this actuator, compare its 1559 N thrust against your actual load: the 50 mm bore neighbor provides 982 N, while the 80 mm bore steps up to 2513 N at 0.5 MPa. As a standard double-acting cylinder, the SE63X160S will drift if air pressure is lost or a valve centers; applications requiring true load holding without live pressure should pivot to the BSE rod-lock series. For direct retrofits, verify the 160 mm stroke, PT3/8 port, and standard ISO 15552 mounting interface.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63X160S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, 160 mm stroke distance, and PT3/8 port size for straightforward hardware retrofitting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.