verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X160SFTC

The AirTAC SE63 Standard Cylinder SE63X160SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke160 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$125.12 $132.62Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X160SFTC

The AirTAC SE63X160SFTC is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. The integrated FTC center-trunnion accessory provides a pivoting anchor point ideal for articulated mechanisms.

Equipped with a built-in position magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune the exhaust bleed via a setscrew, softening the 36 mm cushion zone to absorb kinetic energy smoothly rather than relying on a fixed rubber bumper.

Airtac SE63 Standard Cylinder SE63X160SFTC Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X160SFTC
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke160 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X160SFTC

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×160Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X160SFTC Is Used

precision_manufacturing

CNC Lathe Door Automation

Provides the 1559 N push required to slide heavy soundproof machine doors open and closed, utilizing the FTC trunnion to accommodate the arc of the pivot arm.

packaging

Pallet Dispenser Pusher

Deploys the 160 mm stroke to index empty pallets into a wrapping station, using the adjustable cushion to decelerate the load smoothly before the end cap.

straighten

Metal Stamping Ejector

Uses the 1402 N pull force to extract stamped sheet metal parts from a die cavity, relying on DMSE electronic sensors to confirm part release.

Is the Airtac SE63 Standard Cylinder SE63X160SFTC the Right Cylinder?

Selecting this 63 mm bore makes sense when a 50 mm cylinder (providing 982 N push at 0.5 MPa) lacks the thrust for your payload, but stepping up to an 80 mm bore (2513 N push) would be physically oversized and consume excess air. The 160 mm stroke offers ample extension for mid-range actuation. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve centers; applications requiring static load holding during an outage should integrate a BSE rod lock or an external pilot-operated check valve.

The FTC trunnion mount pairs with the ISO 15552 mounting interface, ensuring dimensional interchangeability for retrofits. Thanks to the -S magnet, you can drop in CMSE or DMSE switches without external hardware. The PT3/8 ports provide sufficient flow to maintain the 30-800 mm/s speed range.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X160SFTC FAQ

At 0.5 MPa, this 63 mm bore cylinder outputs 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The maximum push force is 318 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.

Yes. The SE63X160SFTC is dimensionally interchangeable per ISO 15552, meaning it shares the exact same mounting footprint, bore size, and stroke length. You can drop it into existing tooling alongside the FTC trunnion hardware without modifying the machine frame.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X160SFTC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X160SFTC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.