
The AirTAC SE63 Standard Cylinder SE63X163SN is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 163mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X163SN is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while retaining the standardized ISO 15552 footprint for seamless retrofits.
Equipped with a built-in magnet for CMSE reed and DMSE electronic position sensing, this 63mm bore unit utilizes an NBR seal tailored for general industrial pneumatics. The field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, protecting payloads from hard mechanical impacts.
| Model | Airtac SE63 Standard Cylinder SE63X163SN |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 163 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×163 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes raw bar stock into the collet with 1559 N of force, relying on the NBR seals to withstand occasional cutting fluid exposure in the work zone.
Drives the mechanical arms at 30-800 mm/s to fold heavy cardboard flaps, using the adjustable cushion to prevent tearing at the end of the 163mm stroke.
Actuates a routing gate on a packaging line, using the built-in magnet and DMSE sensors to confirm gate position for the PLC before pallets arrive.
Selecting this 63mm bore provides a 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50mm bore yields 982 N of push, while moving up to the 80mm bore provides 2513 N for heavier loads. The PT3/8 port and M16x1.5 rod thread are standardized to the ISO 15552 interface, meaning you can reuse existing mounting hardware like FA front flanges or TC center trunnions.
Because this is a standard double-acting cylinder, the piston will drift if air pressure is lost or the valve centers; it cannot hold a load statically without live pressure. For tasks requiring absolute position holding, consider the BSE rod-lock variant. At 163mm stroke, side-load stress on the rod bearing is moderate, but always ensure external guides support the payload to maximize seal longevity.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE63X163SN is dimensionally interchangeable per ISO 15552 standards. You can use it as a direct replacement for other ISO 15552 profile cylinders, matching the 63mm bore, 163mm stroke, PT3/8 port, and your existing mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.