
The AirTAC SE63 Standard Cylinder SE63X165S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 165mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X165S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Operating at speeds of 30-800 mm/s, it features a 63 mm bore, a 165 mm stroke, and a PT3/8 port. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from debris.
Equipped with a built-in magnet (-S), this model directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke position detection. It also incorporates field-adjustable pneumatic cushioning at both ends, allowing technicians to tune the deceleration of the 20 mm rod via a set screw to soften hard end stops during high-speed cycling.
| Model | Airtac SE63 Standard Cylinder SE63X165S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push at 0.5 MPa required to cleanly fold heavy corrugated cardboard flaps during high-speed packaging line operations.
Uses the built-in DMSE electronic sensor to confirm stroke endpoints for safe opening and closing of a machine tool safety enclosure.
Acts as a robust pneumatic stop gate on a 165 mm stroke to halt heavy wood pallets on a roller conveyor before the stretch wrapper.
If your application requires less thrust, stepping down to the 50 mm bore yields a 982 N push at 0.5 MPa, whereas stepping up to the 80 mm bore provides a 2513 N push at 0.5 MPa for heavier loads. Remember that a standard SE cylinder relies on live air pressure to hold its position; if air is lost, the piston will drift. For load-holding safety, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, making it a seamless direct retrofit using standard mounting accessories like FA front flanges or TC center trunnions.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X165S generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push of 318 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes. The SE63X165S is an ISO 15552 / VDMA 24562 profile cylinder, meaning its mounting footprint and physical dimensions are interchangeable with other standard ISO 15552 cylinders. You can use your existing ISO mounting brackets and simply swap the unit in.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.