
The AirTAC SE63 Standard Cylinder SE63X170S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 170mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X170S is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Driven by a 63 mm bore and a 170 mm stroke, it operates efficiently at speeds between 30-800 mm/s. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that simplifies bracket mounting and maximizes machine footprint density.
Equipped with a built-in magnet (-S), this unit directly supports AirTAC CMSE reed and DMSE electronic position sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-cap deceleration via a set screw, softening hard mechanical stops during high-velocity cycling.
| Model | Airtac SE63 Standard Cylinder SE63X170S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Actuates a routing flap on a 50 kg logistics conveyor line, utilizing the 1559 N push force to reliably pivot heavy wooden pallets without stalling.
Drives a mechanical folding arm on a continuous packaging line, using the 170 mm stroke to tuck heavy cardboard flaps at speeds up to 800 mm/s.
Deploys a safety interlock door on a CNC turning center, relying on the -S magnet and DMSE sensors to confirm barrier closure before the spindle ramps up.
Selecting the SE63X170S is optimal when your application requires roughly 1559 N of push force at 0.5 MPa. If your load demands less energy, stepping down to the 50 mm bore yields 982 N of push, while scaling up to the 80 mm bore provides 2513 N. Because this is a double-acting cylinder, it relies on continuous air pressure to move; it will drift if air is lost or the valve centers, so a BSE rod lock variant is required for fail-safe load holding.
As a true ISO 15552 profile cylinder, this model serves as a direct replacement for any standard 63 mm bore, 170 mm stroke unit sharing the PT3/8 port and standardized mounting interface. The 170 mm stroke is safely below the 1500 mm maximum standard stroke, keeping the Ø20 mm rod and M16x1.5 thread well-supported without requiring an external guide.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The 63 mm bore generates a push force of 1559 N and a pull force of 1402 N at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE63X170S is dimensionally interchangeable per ISO 15552. You can drop it into existing mounts designed for other 63 mm bore profile cylinders with a 170 mm stroke, provided your setup uses the standard PT3/8 port and matching hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.