
The AirTAC SE63 Standard Cylinder SE63X1750S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 1750mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X1750S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. Operating at 0.15-1.0 MPa, it generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. The 1750 mm stroke is a non-standard, made-to-order length that exceeds the 1500 mm maximum standard stroke for this 63 mm bore, providing extended travel for specialized machinery.
This unit features a square extruded aluminum barrel without external tie rods, yielding a compact, corrosion-resistant body that mounts flush against frames. The integrated -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors. Furthermore, field-adjustable pneumatic cushioning at both ends allows technicians to tune deceleration via a screw, softening hard mechanical stops during high-speed operations.
| Model | Airtac SE63 Standard Cylinder SE63X1750S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 1750 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×1750 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives a long-stroke pusher arm on a pallet conveyor line, utilizing the 1559 N push force to divert heavy goods into an accumulation lane.
Actuates a large protective welding shield across a robotic cell, relying on the 1750 mm stroke and CMSE/DMSE magnet sensors for safe cell enclosure.
Raises and lowers chemical racks into treatment tanks, leveraging the no-tie-rod aluminum profile to resist corrosive washdown environments.
This 63 mm bore provides 1559 N push at 0.5 MPa. If your application requires less force, the neighboring 50 mm bore offers 982 N push; if you need substantially more thrust, stepping up to the 80 mm bore yields 2513 N push. Because the 1750 mm stroke is non-standard and made-to-order, expect a longer lead time. As a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve is centered—the piston will drift. For position holding without live pressure, consider the AirTAC BSE rod lock variant or an external pilot-operated check valve.
At 1750 mm of travel, the 20 mm rod and front bearing face significant bending moments under side loads. To prevent premature seal wear and rod scoring, an external linear guide should support the load along this extended travel path. The PT3/8 port and standardized ISO 15552 mounting interface ensure it drops directly into existing foot or flange hardware.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force reaches 2182 N, with a maximum push of 318 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and uses a PT3/8 port.
Yes, it is dimensionally interchangeable per ISO 15552, allowing it to drop into existing mounting hardware without modifications. However, it is a standard double-acting cylinder, so the piston will drift if air is lost; it does not hold position without live pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.