
The AirTAC SE63 Standard Cylinder SE63X180S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 180mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X180S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa and 2182 N at 0.7 MPa. Its 63 mm bore and 180 mm stroke provide a robust mid-range motion solution, while the square extruded aluminum barrel omits external tie rods for a clean, corrosion-resistant exterior that mounts flush against machine frames.
This specific unit includes a built-in magnet (-S) designed to interface seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection. Field-adjustable pneumatic cushioning at both ends allows technicians to tune the deceleration of the 20 mm rod, softening hard mechanical impacts without relying on fixed rubber bumpers.
| Model | Airtac SE63 Standard Cylinder SE63X180S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides 1559 N of push force at 0.5 MPa to reliably pivot heavy diverters routing full glass beverage bottles onto secondary packaging conveyors.
Utilizes the -S magnet with DMSE sensors to confirm safety door closure on CNC lathes, while the adjustable cushion softens the 180 mm stroke end-stop.
Drives folding mechanisms on heavy-duty corrugated carton sealing machines, where the 1402 N retract force easily overcomes hinge friction.
Choosing this 63 mm bore is ideal when a 50 mm cylinder (982 N push @0.5 MPa) lacks the necessary thrust, but an 80 mm bore (2513 N push @0.5 MPa) would be physical overkill. The PT3/8 port and M16x1.5 rod thread provide a balanced flow rate and side-load capacity for 180 mm of travel. Because this is a double-acting cylinder, it cannot hold a load if air pressure is lost; applications requiring mid-stroke locking should evaluate the BSE rod-lock variant instead. At 180 mm, side-load bending on the rod bearing is moderate, but external guides are recommended if pushing off-center loads. As a true ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other standardized VDMA 24562 cylinders using identical mounting hardware.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X180S generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum of 318 kgf at 1.0 MPa. Its operational speed range is 30-800 mm/s.
Yes, the SE63X180S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing foot or flange mounts and use standard accessories, though it is a profile cylinder without external tie rods.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.