
The AirTAC SE63 Standard Cylinder SE63X185S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 185mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X185S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 1559 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving the integrated sensor grooves fully accessible on three sides.
This 63 mm bore unit features a built-in magnet (-S) for direct compatibility with AirTAC CMSE reed and DMSE electronic position switches. To protect payloads during high-speed 30-800 mm/s cycles, field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration rather than relying on fixed rubber bumpers.
| Model | Airtac SE63 Standard Cylinder SE63X185S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Gates and diverts PET bottles on high-speed packaging lines, utilizing the 1559 N push force and 185 mm stroke to shift product lanes reliably.
Secures aluminum castings inside machining centers, where the adjustable cushioning softens the 2182 N extended stop at 0.7 MPa to prevent part deformation.
Shoves corrugated cartons onto wooden pallets, using the integrated -S magnet to trigger DMSE sensors for precise mid-stroke positioning.
Generating 1559 N of push at 0.5 MPa, this bore is the ideal mid-weight actuator. If your assembly requires less force, the 50 mm bore provides 982 N of push; for heavier payloads, stepping up to the 80 mm bore yields 2513 N. Because this is a standard 185 mm stroke, it is dimensionally interchangeable with any ISO 15552 cylinder of identical bore and stroke, streamlining retrofits.
Although the Ø20 mm rod and M16x1.5 thread handle substantial axial loads, a plain SE cylinder cannot hold a load if air pressure drops—the piston will drift. For fail-safe holding, consider the BSE rod-lock variant. Since the stroke exceeds 300 mm is not applicable here, side-load bending is minimal, but long unsupported strokes still warrant an external guide.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push and 1402 N of pull. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s.
Yes. As an ISO 15552 / VDMA 24562 profile cylinder, its mounting and envelope dimensions are standardized, making it a direct replacement for other ISO 15552 cylinders of the same bore and stroke. Just ensure your port matches the PT3/8 standard.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.