
The AirTAC SE63 Standard Cylinder SE63X190S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 190mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X190S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force and 1402 N of pull force at 0.5 MPa. Driven by a 63 mm bore and 190 mm stroke, it operates at speeds from 30 to 800 mm/s using a PT3/8 port. The integrated -S magnet enables seamless position detection with AirTAC CMSE reed and DMSE electronic sensors.
Unlike traditional tie-rod designs, this profile cylinder utilizes a square extruded aluminum barrel that is completely flush on the exterior, preventing debris buildup while streamlining mounting. The pneumatic cushioning at both ends is field-adjustable via a set screw, allowing you to fine-tune end-of-stroke deceleration and eliminate hard metal-to-metal impacts in high-cycling equipment.
| Model | Airtac SE63 Standard Cylinder SE63X190S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to open and close heavy-duty power chucks on CNC turning centers, while the DMSE electronic sensors feed exact stroke endpoints to the controller.
Routes glass containers between packaging lanes using the 190 mm stroke, relying on the adjustable air cushions to soften directional changes and prevent bottle tipping at high speeds.
Drives the mechanical folding arm on a case erector, utilizing the 63 mm bore's 1402 N retract force to pull the corrugated flaps closed securely before adhesive application.
If your application requires less force, stepping down to the 50 mm bore yields 982 N of push at 0.5 MPa, whereas moving up to the 80 mm bore provides 2513 N. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve is centered—the piston will drift. For critical position-holding, consider the BSE rod-lock variant. To replace an existing cylinder, match the 63 mm bore, 190 mm stroke, PT3/8 port, and mounting accessory; the standardized ISO 15552 footprint ensures direct dimensional interchangeability. At 190 mm, side loading is moderate, but always verify rod-bearing bending loads and use an external guide if heavy eccentric masses are attached.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE63X190S generates 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N. The absolute maximum push capacity is 318 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, the SE63X190S is dimensionally interchangeable with any ISO 15552 profile cylinder. As long as you match the 63 mm bore, 190 mm stroke, PT3/8 port, and mounting interface, it will serve as a direct replacement without requiring custom brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.