Airtac SE63 Standard Cylinder SE63X195
The AirTAC Airtac SE63 Standard Cylinder SE63X195 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ63 mm
- Stroke195 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE63 Standard Cylinder SE63X195
The AirTAC SE63X195 is a double-acting, single-rod ISO 15552 profile cylinder delivering a robust 1559 N push force at 0.5 MPa. It features a clean, square extruded aluminum barrel without external tie rods, making it highly resistant to corrosion and easy to mount flush against machine frames. This stroke length is a made-to-order dimension within the standard 1500 mm limit for this bore.
Because this specific SKU lacks the -S magnet code, it is not equipped from the factory for CMSE or DMSE position sensing. The field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE63 Standard Cylinder SE63X195 Technical Specifications
| Model | Airtac SE63 Standard Cylinder SE63X195 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE63 Standard Cylinder SE63X195
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE63 Standard Cylinder SE63X195 Is Used
Carton Erector Flaps
Provides 1559 N of push at 0.5 MPa to reliably fold heavy corrugated carton flaps during high-speed packaging lines.
Pallet Diverters
Handles the 195 mm stroke to push heavy wooden pallets off a main conveyor belt onto a secondary packaging branch.
CNC Fixture Clamps
Secures cast iron automotive housings during machining, using the adjustable end-cushions to prevent jarring the fixture base.
Is the Airtac SE63 Standard Cylinder SE63X195 the Right Cylinder?
If you need to step the bore down for a lighter payload, the 50 mm frame offers 982 N push at 0.5 MPa, whereas stepping up to the 80 mm bore provides 2513 N. Remember that a plain double-acting cylinder like this drifts when air pressure is lost or a valve centers; it cannot hold a load mid-stroke without live pressure, so consider an AirTAC BSE rod lock for safety-critical holding. For a drop-in replacement, match the 63 mm bore, 195 mm stroke, PT3/8 port, and your required mounting accessory. Since the stroke is under 300 mm, side-load stress on the M16x1.5 rod thread is minimal, though external guides are still recommended for heavy lateral loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE63 Standard Cylinder SE63X195 FAQ
The SE63X195 generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE63X195 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and PT3/8 port locations as comparable profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE63 Standard Cylinder SE63X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.