
The AirTAC SE63 Standard Cylinder SE63X195S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X195S is a double-acting, single-rod ISO 15552 profile cylinder engineered for industrial pneumatics. It features a 63 mm bore and a 195 mm stroke, generating 1559 N of push force and 1402 N of pull force at 0.5 MPa. The square extruded aluminum barrel completely eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics from debris.
Equipped with a built-in magnet (-S), this unit seamlessly integrates AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection across its three dedicated sensor grooves. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a simple screw, softening hard mechanical stops during 30-800 mm/s cycling and extending component lifespan.
| Model | Airtac SE63 Standard Cylinder SE63X195S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 1559 N push force required to erect and fold heavy corrugated cardboard cartons, utilizing the 195 mm stroke to clear the packaging tooling during retraction.
Actuates a routing gate on a 30-800 mm/s conveyor line, using the S magnet and DMSE sensors to confirm the diverter is fully home before pallets pass.
Secures aluminum castings inside a machining center, applying 1402 N of retract pull force to hold the fixture firmly against the tooling vibration.
When sizing this 63 mm bore actuator, evaluate your load against its 1559 N push at 0.5 MPa. If your application requires less force, stepping down to the 50 mm bore yields 982 N of push, while moving up to the 80 mm bore provides 2513 N for heavier payloads. Remember that a standard SE cylinder relies on live air pressure to maintain position; if air is lost or the valve centers, the piston will drift, so consider the AirTAC BSE rod-lock variant for fail-safe holding. Because this 195 mm stroke falls under the 300 mm threshold, side-load stress on the M16x1.5 rod thread and bearing is moderate, though an external guide is still recommended for rigidly attached loads. As a dimensionally interchangeable ISO 15552 component, it serves as a direct replacement for other ISO 15552 profile cylinders, utilizing the same PT3/8 port and standardized mounting accessories.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
The SE63X195S generates 1559 N of push force and 1402 N of pull force at 0.5 MPa. At 0.7 MPa, the push force reaches 2182 N. The maximum operating pressure is 1.0 MPa, where it achieves a maximum push of 318 kgf.
Yes, the SE63X195S is dimensionally interchangeable per ISO 15552 standards. It shares the identical mounting footprint, PT3/8 port size, and M16x1.5 rod thread, allowing it to drop in as a replacement for other ISO 15552 profile cylinders without modifying the machine.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.