
The AirTAC SE63 Standard Cylinder SE63X200H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE63X200H is a double-acting ISO 15552 profile cylinder engineered for high-temperature duty. It features a 63 mm bore and 200 mm stroke, generating a robust 1559 N push force at 0.5 MPa. The integrated FKM (Viton) seal expands the operating temperature range up to 150 C, making it highly reliable in thermally demanding environments like packaging heat tunnels or automotive curing ovens.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. Note this specific SKU lacks a piston magnet, so it does not support CMSE or DMSE position sensing without modification.
| Model | Airtac SE63 Standard Cylinder SE63X200H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Handles the 1559 N push required to close heavy sealing bars while the FKM seal survives continuous proximity to 150 C heat tunnels.
Provides the 200 mm reach and 1402 N retract force to push cured composite parts out of heated molds without tie-rod obstructions.
Actuates routing gates on high-temperature powder coating lines, using its adjustable cushion to soften stops at 800 mm/s transit speeds.
Selecting this 63 mm bore makes sense when a 50 mm cylinder (982 N push @0.5 MPa) is underpowered, but an 80 mm unit (2513 N push @0.5 MPa) is physically oversized. The PT3/8 port and M16x1.5 rod thread provide ample flow and mechanical strength for mid-range actuation. Because this SKU uses a standard 200 mm stroke, it serves as a direct, dimensionally interchangeable direct replacement for any ISO 15552 cylinder without altering mounting centers.
If your process requires the rod to hold a vertical load or maintain its position when air pressure is lost, a plain SE cylinder will drift; you should pivot to the BSE rod-lock variant or integrate an external pilot-operated check valve. Furthermore, while the 20 mm rod handles standard bending loads well, any stroke of 300 mm or longer on this bore requires an external guide to prevent rod-bearing distortion under side loading.
AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder
Quick checklist
This 63 mm bore cylinder generates 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. Equipped with an FKM (Viton) seal, it operates in environments reaching 150 C.
Yes, the SE63X200H shares the exact ISO 15552 / VDMA 24562 mounting interface and PT3/8 porting, making it a direct retrofit for other profile cylinders of the same bore and stroke. Just ensure your mounting hardware matches the standard footprint.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.