verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE63 Standard Cylinder SE63X200S

The AirTAC SE63 Standard Cylinder SE63X200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø63mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke200 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$103.25 $110.75Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE63 stroke, mounting and version on one page All SE63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE63 Standard Cylinder SE63X200S

The AirTAC SE63X200S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 1559 N of push force at 0.5 MPa. Driven by filtered air, it operates reliably between 0.15-1.0 MPa and features a PT3/8 port paired with a 20 mm hard-chrome rod. This unit includes a built-in magnet (-S) designed specifically for seamless integration with AirTAC CMSE reed and DMSE electronic position sensors.

Unlike traditional tie-rod designs, its square extruded aluminum barrel lacks external tie rods, offering a compact, corrosion-resistant profile that mounts flush on machinery while exposing standardized ISO 15552 mounting dimensions. The field-adjustable pneumatic cushioning at both stroke ends allows you to tune end-of-stroke deceleration via a set screw, softening hard mechanical stops during 30-800 mm/s cycling.

Airtac SE63 Standard Cylinder SE63X200S Technical Specifications

ModelAirtac SE63 Standard Cylinder SE63X200S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke200 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1559 N1402 N
0.7 MPa2182 N—
Max (@1.0 MPa)318 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE63 Standard Cylinder SE63X200S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
63Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE63 Standard Cylinder SE63X200S Is Used

conveyor_belt

Bottling Line Diverter

Actuates routing gates on high-speed beverage conveyors, utilizing the 1559 N push force to smoothly pivot heavy lane guides while the DMSE sensor confirms stroke completion.

packaging

Corrugated Box Flap Folder

Folds heavy cardboard flaps on case packing machines, where the adjustable pneumatic cushion softens the impact of rapid 30-800 mm/s cycling at both stroke ends.

precision_manufacturing

CNC Lathe Bar Feeder

Pushes raw bar stock into CNC turning centers, relying on the flush extruded aluminum profile to mount cleanly against sub-assembly tooling without tie-rod interference.

Is the Airtac SE63 Standard Cylinder SE63X200S the Right Cylinder?

If your application requires less force, the adjacent 50 mm bore provides 982 N of push at 0.5 MPa, whereas stepping up to the 80 mm bore yields 2513 N. The 63 mm bore is optimal for medium-duty actuation. To match an existing fixture, specify the 200 mm stroke, PT3/8 port, and your required ISO 15552 mounting accessory. Because this is a standard double-acting cylinder, it will drift if air pressure is lost or the valve is centered; if the load must be held mechanically without live pressure, integrate a BSE rod lock or an external pilot-operated check valve. For this 200 mm stroke, the 20 mm rod handles standard axial loads, but long unsupported strokes exceeding 300 mm will require an external guide to prevent rod-bearing bending.

AirtacDistr lists every SE63 order code with its price on one page at https://airtacdistr.com/products/airtac-se63-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE63 Standard Cylinder SE63X200S FAQ

At 0.5 MPa, this 63 mm bore cylinder provides 1559 N of push force and 1402 N of pull force. At 0.7 MPa, the push force increases to 2182 N, with a maximum push capacity of 318 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes. The SE63X200S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards, meaning it shares the exact same mounting footprint and thread interface (M16x1.5 rod, PT3/8 port) as other ISO 15552 profile cylinders. The built-in -S magnet also allows you to directly mount AirTAC CMSE or DMSE sensors for position feedback.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE63 Standard Cylinder SE63X200S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE63X200S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.